| 英文摘要 |
In recent years, driven by climate change concerns and the demand for low-carbon materials, bamboo has attracted attention due to its carbon storage capacity, rapid growth, and high specific strength. However, as a biological material, bamboo is susceptible to deterioration by fungi and termites, and its durability remains a major limitation. This study evaluated termite- and mold-resistant treatments for domestically grown Moso bamboo culms to support their application as building materials. Results showed that untreated bamboo was highly susceptible to termite attack. Boron-based treatments effectively reduced mass loss and increased termite mortality, while ACQ-treated specimens also exhibited termite resistance. Although wood oil reduced mass loss, its termite resistance did not meet the requirements of CNS 15756. In the 28-day mold test, untreated bamboo showed extensive mold growth. Mold resistance of the boron-based treatments increased with treatment level, and ACQ showed favorable performance at hazard class K4. Wood oil provided effective mold protection on both the outer and inner surfaces, whereas zinc naphthenate was more effective on the outer surface and provided less protection on the inner surface. Full-scale 2 m Moso bamboo culms were treated with ACQ, wood oil, and zinc naphthenate. The ACQ preservative was concentrated mainly near the culm surfaces, with limited transverse penetration through the culm wall. Regarding mechanical properties, the ACQ-treated group exhibited a higher moisture content under the drying conditions adopted in this study and was also subjected to node-perforation treatment. Its lower mean bending strength may therefore have been associated with the moisture condition at the time of testing and the local weakening caused by node perforation. The groups treated with wood oil and zinc naphthenate showed mean bending strengths comparable to that of the untreated group. |